Princeton Instruments spectrograph has Schmidt corrector, eliminating field astigmatism

May 9, 2012
Trenton, NJ--Princeton Instruments has introduced a new toroidal-mirror-based imaging spectrograph that includes a Schmidt corrector in its optics, completely eliminating astigmatism across the field.

Trenton, NJ--Princeton Instruments has introduced a new toroidal-mirror-based imaging spectrograph that includes a Schmidt corrector in its optics, completely eliminating astigmatism across the field. The IsoPlane SCT-320 was unveiled at The Optical Society’s Conference on Lasers and Electro-Optics (CLEO) 2012 (San Jose, CA) on Tuesday, May 8.

The instrument’s f/4.6 optical design (which is patent-pending) allows it to produce near-Lorentzian spectral lines across the image plane and image 16 line pairs per millimeter across the entire field. This imaging quality is approaching the limit on resolution set by the pixel size of the imaging detector itself, which is 25 line pairs per millimeter. Because more photons end up in the spectral peaks, the signal-to-noise ratio is increased.

“Getting rid of field astigmatism allows up to 200 channels,” says Jason McClure, chief scientist at Princeton Instruments and designer of the optics.

The design of the IsoPlane SCT-320 is a modification of the classic Czerny-Turner design, dubbed the Schmidt-Czerny-Turner (SCT). McClure notes that the SCT design could allow imaging across an entire microscope field and could enable using a large 1” camera rather than a standard 8 mm camera.

Applications for the IsoPlane spectrograph include include multichannel spectroscopy, microspectroscopy (including Raman spectroscopy, fluorescence and photoluminescence), laser-induced breakdown spectroscopy (LIBS) and similar high-resolution techniques, Fourier-domain spectroscopy, and biomedical imaging.

Princeton Instruments says it is taking orders now and shipping in July.

For more info, see http://www.princetoninstruments.com/products/spec/isoplane/default.aspx

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!