Confirmed by experiment, calculations show how deep light goes into a DBR mirror before it reflects; this is relevant for determining microcavity lengths.
The implementation of virus-inactivating UVC Germicidal LED technology helps protect educators, staff, and students by reducing surface contamination and creating air disinfection...
The PLUTO-2 spatial light modulator uses reflective liquid-crystal mini displays for holographic applications in the UV, visible, near-infrared, and telecommunications wavebands...
For the second year, Laser Focus World held its Innovators Awards program, which celebrates the disparate and innovative technologies, products, and systems found in the photonics...
Fourteen standard bandpass filters are sawn hexagonally and integrated into pluggable filter mounts with an inner diameter of 8.5 mm and an aperture of 6 mm.
The IG22 line sensor is an extended InGaAs detector for shortwave infrared (SWIR) spectroscopy, with 256 pixels measuring 30 × 250 μm with a 50 μm pitch.
As of July 2014, Laser Components Group has expanded its infrared detector activities by acquiring the majority ownership of U.S.-based manufacturer, Microwatt Applications (Stuart...
The Flexpoint MV 405 and 445 nm line lasers—with violet and blue beams, respectively—provide between 1 and 400 mW of output power for machine vision applications.
Laser Components recently signed a contract with optical fibers manufacturer Polymicro Technologies, which applies to all German-speaking countries and territories.
The FLEXPOINT laser modules for microscope applications achieve a beam diameter of 0.020 mm at a distance of 100 mm (1/e2), with available operating voltages of 4.5–6 or 8–30 ...
The Countblue single-photon counting module can detect more than 60% of incoming photons at 405 nm, and more than 65% in the green, with typical detection efficiency in the red...
The COUNT photon counting modules from Laser Components achieve quantum efficiency of over 70% in the red region for confocal microscopy and fluorescence analysis.
Laser Components, Hudson, N.H., has introduced anti-reflection coatings for use when high power has to be transmitted across optical fibers using a laser. These coatings significantly...
The LSP40 series plug & play driver module accurately controls pulsed laser diodes (PLDs) with two resistors, regulating operating current and pulse length.
Optics for Hire has been selected by Laser Components Instrument Group (Wilmington, MA) to assist in the development of a new generation of laser spectrometer. Optics for Hire...
